Items

Advanced search

Carbon monoxide distributions from the IASI/METOP mission: evaluation with other space-borne remote sensors

The Infrared Atmospheric Sounding Interferometer (IASI) onboard the MetOp satellite measures carbon monoxide (CO) on a global scale, twice a day. CO total columns and vertical profiles are retrieved in near real time from the nadir radiance spectra measured by the instrument in the thermal infrared (TIR) spectral range. This paper describes the measurement vertical sensitivity and provides a first assessment of the capabilities of IASI to measure CO distributions. On the global scale, 0.8 to 2.4 independent pieces of information are available for the retrieval. At mid latitudes, the information ranges between 1.5 and 2, which enables the lower and upper troposphere to be distinguished, especially when thermal contrast is significant. Global distributions of column CO are evaluated with correlative observations available from other nadir looking TIR missions currently in operation: the Measurements of Pollution in the Troposphere (MOPITT) onboard TERRA, the Atmospheric Infrared Sounder (AIRS) onboard AQUA and the Tropospheric Emission Spectrometer (TES) onboard AURA. The IASI CO columns are compared with MOPITT, AIRS and TES CO columns, adjusted with the a priori, for three different months: August 2008, November 2008 and February 2009. On average, total column discrepancies of about 7% are found between IASI and the three other sounders in the Northern Hemisphere and in the equatorial region. However when strong CO concentrations are present, such as during fire events, these discrepancies can climb as high as 17%. Instrument specifications of IASI versus other missions are also discussed.
NOx production by lightning in Hector: first airborne measurements during SCOUT-O3/ACTIVE

During the SCOUT-O3/ACTIVE field phase in November–December 2005, airborne in situ measurements were performed inside and in the vicinity of thunderstorms over northern Australia with several research aircraft (German Falcon, Russian M55 Geophysica, and British Dornier-228. Here a case study from 19 November is presented in detail on the basis of airborne trace gas measurements (NO, NOy, CO, O3) and stroke measurements from the German LIghtning Location NETwork (LINET), set up in the vicinity of Darwin during the field campaign. The anvil outflow from three different types of thunderstorms was probed by the Falcon aircraft: (1) a continental thunderstorm developing in a tropical airmass near Darwin, (2) a mesoscale convective system (MCS), known as Hector, developing within the tropical maritime continent (Tiwi Islands), and (3) a continental thunderstorm developing in a subtropical airmass ~200 km south of Darwin. For the first time detailed measurements of NO were performed in the Hector outflow. The highest NO mixing ratios were observed in Hector with peaks up to 7 nmol mol−1 in the main anvil outflow at ~11.5–12.5 km altitude. The mean NOx (=NO+NO2) mixing ratios during these penetrations (~100 km width) varied between 2.2 and 2.5 nmol mol−1. The NOx contribution from the boundary layer (BL), transported upward with the convection, to total anvil-NOx was found to be minor (<10%). On the basis of Falcon measurements, the mass flux of lightning-produced NOx (LNOx) in the well-developed Hector system was estimated to 0.6–0.7 kg(N) s−1. The highest average stroke rate of the probed thunderstorms was observed in the Hector system with 0.2 strokes s−1 (here only strokes with peak currents ≥10 kA contributing to LNOx were considered). The LNOx mass flux and the stroke rate were combined to estimate the LNOx production rate in the different thunderstorm types. For a better comparison with other studies, LINET strokes were scaled with Lightning Imaging Sensor (LIS) flashes. The LNOx production rate per LIS flash was estimated to 4.1–4.8 kg(N) for the well-developed Hector system, and to 5.4 and 1.7 kg(N) for the continental thunderstorms developing in subtropical and tropical airmasses, respectively. If we assume, that these different types of thunderstorms are typical thunderstorms globally (LIS flash rate ~44 s−1), the annual global LNOx production rate based on Hector would be ~5.7–6.6 Tg(N) a−1 and based on the continental thunderstorms developing in subtropical and tropical airmasses ~7.6 and ~2.4 Tg(N) a−1, respectively. The latter thunderstorm type produced much less LNOx per flash compared to the subtropical and Hector thunderstorms, which may be caused by the shorter mean flash component length observed in this storm. It is suggested that the vertical wind shear influences the horizontal extension of the charged layers, which seems to play an important role for the flash lengths that may originate. In addition, the horizontal dimension of the anvil outflow and the cell organisation within the thunderstorm system are probably important parameters influencing flash length and hence LNOx production per flash.
Origin of aerosol particles in the mid-latitude and subtropical upper troposphere and lowermost stratosphere from cluster analysis of CARIBIC data

The origin of aerosol particles in the upper troposphere and lowermost stratosphere over the Eurasian continent was investigated by applying cluster analysis methods to in situ measured data. Number concentrations of submicrometer aerosol particles and trace gas mixing ratios derived by the CARIBIC (Civil Aircraft for Regular Investigation of the Atmosphere Based on an Instrument Container) measurement system on flights between Germany and South-East Asia were used for this analysis. Four cluster analysis methods were applied to a test data set and their capability of separating the data points into scientifically reasonable clusters was assessed. The best method was applied to seasonal data subsets for summer and winter resulting in five cluster or air mass types: stratosphere, tropopause, free troposphere, high clouds, and boundary layer influenced. Other source clusters, like aircraft emissions could not be resolved in the present data set with the used methods. While the cluster separation works satisfactory well for the summer data, in winter interpretation is more difficult, which is attributed to either different vertical transport pathways or different chemical lifetimes in both seasons. The geographical distribution of the clusters together with histograms for nucleation and Aitken mode particles within each cluster are presented. Aitken mode particle number concentrations show a clear vertical gradient with the lowest values in the lowermost stratosphere (750–2820 particles/cm3 STP, minimum of the two 25% – and maximum of the two 75%-percentiles of both seasons) and the highest values for the boundary-layer-influenced air (4290–22 760 particles/cm3 STP). Nucleation mode particles are also highest in the boundary-layer-influenced air (1260–29 500 particles/cm3 STP), but are lowest in the free troposphere (0–450 particles/cm3 STP). The given submicrometer particle number concentrations represent the first large-scale seasonal data sets for the upper troposphere and lowermost stratosphere over the Eurasian continent.
The effect of nonlinearity in CO2 heating rates on the attribution of stratospheric ozone and temperature changes

An analysis of the attribution of past and future changes in stratospheric ozone and temperature to anthropogenic forcings is presented. The analysis is an extension of the study of Shepherd and Jonsson (2008) who analyzed chemistry-climate simulations from the Canadian Middle Atmosphere Model (CMAM) and attributed both past and future changes to changes in the external forcings, i.e. the abundances of ozone-depleting substances (ODS) and well-mixed greenhouse gases. The current study is based on a new CMAM dataset and includes two important changes. First, we account for the nonlinear radiative response to changes in CO2. It is shown that over centennial time scales the radiative response in the upper stratosphere to CO2 changes is significantly nonlinear and that failure to account for this effect leads to a significant error in the attribution. To our knowledge this nonlinearity has not been considered before in attribution analysis, including multiple linear regression studies. For the regression analysis presented here the nonlinearity was taken into account by using CO2 heating rate, rather than CO2 abundance, as the explanatory variable. This approach yields considerable corrections to the results of the previous study and can be recommended to other researchers. Second, an error in the way the CO2 forcing changes are implemented in the CMAM was corrected, which significantly affects the results for the recent past. As the radiation scheme, based on Fomichev et al. (1998), is used in several other models we provide some description of the problem and how it was fixed.
The continental source of glyoxal estimated by the synergistic use of spaceborne measurements and inverse modelling

Tropospheric glyoxal and formaldehyde columns retrieved from the SCIAMACHY satellite instrument in 2005 are used with the IMAGESv2 global chemistry-transport model and its adjoint in a two-compound inversion scheme designed to estimate the continental source of glyoxal. The formaldehyde observations provide an important constraint on the production of glyoxal from isoprene in the model, since the degradation of isoprene constitutes an important source of both glyoxal and formaldehyde. Current modelling studies underestimate largely the observed glyoxal satellite columns, pointing to the existence of an additional land glyoxal source of biogenic origin. We include an extra glyoxal source in the model and we explore its possible distribution and magnitude through two inversion experiments. In the first case, the additional source is represented as a direct glyoxal emission, and in the second, as a secondary formation through the oxidation of an unspecified glyoxal precursor. Besides this extra source, the inversion scheme optimizes the primary glyoxal and formaldehyde emissions, as well as their secondary production from other identified non-methane volatile organic precursors of anthropogenic, pyrogenic and biogenic origin. In the first inversion experiment, the additional direct source, estimated at 36 Tg/yr, represents 38% of the global continental source, whereas the contribution of isoprene is equally important (30%), the remainder being accounted for by anthropogenic (20%) and pyrogenic fluxes. The inversion succeeds in reducing the underestimation of the glyoxal columns by the model, but it leads to a severe overestimation of glyoxal surface concentrations in comparison with in situ measurements. In the second scenario, the inferred total global continental glyoxal source is estimated at 108 Tg/yr, almost two times higher than the global a priori source. The extra secondary source is the largest contribution to the global glyoxal budget (50%), followed by the production from isoprene (26%) and from anthropogenic NMVOC precursors (14%). A better performance is achieved in this case, as the updated emissions allow for a satisfactory agreement of the model with both satellite and in situ glyoxal observations.
Evaluating the potential of IASI ozone observations to constrain simulated surface ozone concentrations

A tracer study has been performed for two summers in 2003 and 2004 with a regional chemistry-transport model in order to evaluate the potential constraint that tropospheric ozone observations from nadir viewing infrared sounders like IASI or TES exert on modelled near surface ozone. As these instruments show high sensitivity in the free troposphere, but low sensitivity at ground, it is important to know how much of the information gained in the free troposphere is transferred to ground through vertical transport processes. Within the European model domain, and within a time span of 4 days, only ozone like tracers initialised in vertical layers above 500 hPa are transported to the surface. For a tracer initialised between 800 and 700 hPa, seven percent reaches the surface within one to three days, on the average over the European model domain but more than double over the Mediterranean Sea. For this region, trajectory analysis shows that this is related to strong subsident transport. These results are confirmed by a second tracer study taking into account averaging kernels related to IASI retrievals, indicating the potential of these measurements to efficiently constrain surface ozone values.
Extreme Saharan dust event over the southern Iberian Peninsula in september 2007: active and passive remote sensing from surface and satellite

This study investigates aerosol optical properties during the extreme Saharan dust event detected from 3 to 7 September 2007 over Granada, southern Iberian Peninsula, with both active and passive remote sensing instrumentation from surface and satellite. The intensity of the event was visualized on the aerosol optical depth series obtained by the sun-photometer Cimel CE 318-4 operated at Granada in the framework of AERONET from August 2004 until December 2008 (level 2 data). A combination of large aerosol optical depth (0.86–1.50) at 500 nm, and reduced Angström exponent (0.1–0.25) in the range 440–870 nm, was detected on 6 September during daytime. This Saharan dust event also affected other Iberian Peninsula stations included in AERONET (El Arenosillo and Évora stations), and it was monitored by MODIS instrument on board Aqua satellite. Vertically resolved measurements were performed by a ground-based Raman Lidar and by CALIPSO satellite. During the most intense stage, on 6 September, maximum aerosol backscatter values were a factor of 8 higher than other maxima during this Saharan dust event. Values up to 1.5×10−2 km−1 sr−1 at 355 and 532 nm were detected in the layer with the greatest aerosol load between 3–4 km a.s.l., although aerosol particles were also detected up to 5.5 km a.s.l. In this stage of the event, dust particles at these altitudes showed a backscatter-related Angström exponent between –0.44 and 0.53 for the two spectral intervals considered. The results from different measurements (active/passive and ground-based/satellite) reveal the importance of performing multi-instrumental measurements to properly characterize the contribution of different aerosol types from different sources during extreme events. The atmospheric stabilization effect of the aerosol particles has been characterized by computing the solar heating rates using SBDART code.
Direct estimates of emissions from the megacity of Lagos

We report here top-down emissions estimates for an African megacity. A boundary layer circumnavigation of Lagos, Nigeria was completed using the FAAM BAe146 aircraft as part of the AMMA project. These observations together with an inferred boundary layer height allow the flux of pollutants to be calculated. Extrapolation gives annual emissions for CO, NOx, and VOCs of 1.44 Tg yr−1, 0.03 Tg yr−1 and 0.37 Tg yr−1 respectively with uncertainties of +250/−60%. These inferred emissions are consistent with bottom-up estimates for other developing megacities and are attributed to the evaporation of fuels, mobile combustion and natural gas emissions.
Exploiting the weekly cycle as observed over Europe to analyse aerosol indirect effects in two climate models

A weekly cycle in aerosol pollution and some meteorological quantities is observed over Europe. In the present study we exploit this effect to analyse aerosol-cloud-radiation interactions. A weekly cycle is imposed on anthropogenic emissions in two general circulation models that include parameterizations of aerosol processes and cloud microphysics. It is found that the simulated weekly cycles in sulfur dioxide, sulfate, and aerosol optical depth in both models agree reasonably well with those observed indicating model skill in simulating the aerosol cycle. A distinct weekly cycle in cloud droplet number concentration is demonstrated in both observations and models. For other variables, such as cloud liquid water path, cloud cover, top-of-the-atmosphere radiation fluxes, precipitation, and surface temperature, large variability and contradictory results between observations, model simulations, and model control simulations without a weekly cycle in emissions prevent us from reaching any firm conclusions about the potential aerosol impact on meteorology or the realism of the modelled second aerosol indirect effects.
A consistent molecular hydrogen isotope chemistry scheme based on an independent bond approximation

The isotopic composition of molecular hydrogen (H2) produced by photochemical oxidation of methane (CH4) and Volatile Organic Compounds (VOCs) is a key quantity in the global isotope budget of (H2). The many individual reaction steps involved complicate its investigation. Here we present a simplified structure-activity approach to assign isotope effects to the individual elementary reaction steps in the oxidation sequence of CH4 and some other VOCs. The approach builds on and extends the work by Gerst and Quay (2001) and Feilberg et al. (2007b). The description is generalized and allows the application, in principle, also to other compounds. The idea is that the C-H and C-D bonds – seen as reactive sites – have similar relative reaction probabilities in isotopically substituted, but otherwise identical molecules. The limitations of this approach are discussed for the reaction CH4+Cl. The same approach is applied to VOCs, which are important precursors of H2 that need to be included into models. Unfortunately, quantitative information on VOC isotope effects and source isotope signatures is very limited and the isotope scheme at this time is limited to a strongly parameterized statistical approach, which neglects kinetic isotope effects. Using these concepts we implement a full hydrogen isotope scheme in a chemical box model and carry out a sensitivity study to identify those reaction steps and conditions that are most critical for the isotope composition of the final H2 product. The reaction scheme is directly applicable in global chemistry models, which can thus include the isotope pathway of H2 produced from CH4 and VOCs in a consistent way.